How To Make Bleach Shinigami Outfit

Bleaching wood - how to proceed

Bleaching wood is often necessary when a piece of furniture with a darker color is to be given a lighter color. Grinding is not always the ideal solution.

What you need:

  • Paint stripper
  • water
  • White vinegar
  • spirit
  • Rag
  • 2-component bleach
  • Clear coat
  • Sandpaper
  • colour
  • Wood stain
  • brush

Making wood lighter - when sanding no longer helps

  • Do you have dark furniture that needs a different color and now you want to know how to proceed with the bleaching of wood? With a little patience, you can stain your furniture yourself.
  • Most of the time, it helps to simply sand the wood. For this, however, the wood must be light enough. If it is too dark, you cannot avoid bleaching the material.
  • Bleaching may also be necessary if there are marks from glass, bumps or water stains on the furniture. When repainting, these stains may show through the paint.

Furniture bleaching in just a few steps

When bleaching, please work in a room that is well ventilated to avoid damage from the chemicals.

  1. Sand off the old varnish or paint with sandpaper or a sander.
  2. Take a towel and soak it in alcohol. Use this cloth to wash the wood and, after removing the stains, let the wood dry for two days.
  3. Before you apply the 2-component bleaching agent, you should test a small area to see how the agent affects the wood. You can use this to estimate how long the material will take to dry.
  4. Now apply the A component evenly to the wood with a brush and let it dry for about 10 minutes before you continue with the B component.
  5. Once dry, apply the B component as you did the A component and let it dry for four hours.
  6. Then wash the wood well with a solution of water and vinegar (ratio 50:50). How to neutralize the bleach.
  7. After a drying time of 12 hours, wash the wood with clear water to remove the vinegar-water solution.
  8. After 72 hours, check the color of the wood to see if bleaching is enough. If not, repeat the process all over again.
  9. If you are satisfied with the color, sand the wood with emery paper.
  10. Then apply the future color, the stain or the clear varnish to the material.
  11. The bleaching of wood has now been successfully completed.

How helpful do you find this article?