How to reset Jura Impressa S90

Impressa S9 presses the coffee over the entire spout

  • Hello everybody,
    Since this morning, my impressa s9 has been dispensing coffee only sparsely via a spout. I then moved the spout up and down and now the coffee is pressed from behind over the entire spout. I have to set the spout to the lowest position so that not everything is put under water or, better, under coffee.
    Does anyone have any idea where the problem could be. I have already thought of defective seals, but the machine was undergoing complete maintenance at the service company just under 4 months ago.

    thank you in advance

    Ben: think:
  • Hello Helmut,
    Thank you for the tip. I got pipe cleaners. Unfortunately I haven't had any real success so far. I have a bit of a musty whimper that I stick too deep into the outlet pipes with the cleaners and that then maybe does more harm than good. I'll try again, otherwise I'll have to use the service provider.

    Thank you again and best regards
    : thump:

    Ben
  • Hello Helmut,

    that is a reliable statement. thank you very much. I assume that washing up liquid, dishwasher tabs etc. will work as a degreaser or can I also dissolve a Jura cleaning tablet and try it?

    LG
    Ben who doesn't let go of the cleaning button
  • And if none of this is of any use: The spout of the S9 can be easily dismantled without dismantling the machine. That's why I wouldn't go to service.

    greeting
    Gregor

    VA career: Jura E75 06.2006-10.2006 >>> Jura S9 Avantgarde 10.2006-07.2007 >>> 08.2007-04.2008: DeLonghi PrimaDonna
    ST career:Gaggia Evolution with Demoka M-203 10.2007-01.2009 >>> Arte di Poccino Bar (ST + Mühle) since 01.2009 >>> from 03/2009 La Spaziale Mini Vivaldi + from 12/2009 Casadio Instantaneous >>> from 04/2013 Bezzera 2000AL
  • hello Gregor,
    thanks for the tip, I've already thought about it. I don't dare to go there without instructions.

    I'll google again if I can find instructions for it somewhere.

    Thanks and best regards

    Ben: thump:
  • Have coffee degreaser and pipe cleaners brought no improvement so far?

    greeting
    Gregor

    VA career: Jura E75 06.2006-10.2006 >>> Jura S9 Avantgarde 10.2006-07.2007 >>> 08.2007-04.2008: DeLonghi PrimaDonna
    ST career:Gaggia Evolution with Demoka M-203 10.2007-01.2009 >>> Arte di Poccino Bar (ST + Mühle) since 01.2009 >>> from 03/2009 La Spaziale Mini Vivaldi + from 12/2009 Casadio Instantaneous >>> from 04/2013 Bezzera 2000AL
  • Hello,

    Instructions for opening the device are available here:
    komtra.de/KOMTRA_GMBH_S_GEHAEUSE_OEFFNEN_SCHIESSEN.pdf

    If you have the machine open that far, you will see that the entire outlet slide
    is only clipped into the front door. Easily removed and then disassembled.

    Once you've seen what the spout looks like when it's blocked, you will
    You will no longer poke around with aids in the future, but the outlet
    dismantle and clean thoroughly - that's right bäähhh! and go through that
    Only partially poked away!

    greeting
    BS
    I generally do not reply to guest posts.

    Home: Jura GIGA 5 piano black-chrome (Bj. 2012)
    Office: Jura XJ9 (YOC 2015)
  • You can also remove the spout without opening the machine, at least that was possible with my S9 Avantgarde, the S9 is identical in construction. Incidentally, instructions for dismantling are not only available from Komtra, but in many places on the Internet.

    You can easily squeeze the part where the Jura logo is on and unhook it upwards. Then you can actually see how you can further dismantle the spout. Just a little tip: watch out for the 4 small cylindrical magnets that they don't fly around in the kitchen, it happened to me.

    greeting
    Gregor

    VA career: Jura E75 06.2006-10.2006 >>> Jura S9 Avantgarde 10.2006-07.2007 >>> 08.2007-04.2008: DeLonghi PrimaDonna
    ST career:Gaggia Evolution with Demoka M-203 10.2007-01.2009 >>> Arte di Poccino Bar (ST + Mühle) since 01.2009 >>> from 03/2009 La Spaziale Mini Vivaldi + from 12/2009 Casadio Instantaneous >>> from 04/2013 Bezzera 2000AL
  • Hello everyone and a really friendly good morning,

    so first of all, many, many thanks to all of you for the good tips. I actually got it yesterday at the following link:

    buessert.de/technik/JURA-Impressa-S95/Renigungsanleitung.htm

    found a very good disassembly instruction. I then used your tips and the instructions this morning and lo and behold, with a little calm and patience I was able to dismantle the machine. Then Jura cleaning tablets dissolved and the whole spout rinsed. Man oh man how disgusting, I would not have thought possible what a Schmadder separates. Then all parts were diligently washed and the machine cleaned at the same time. After reassembly with no screw left,: thump: rinsed again vigorously and the coffee runs properly again.

    So as I said many times merci
    that's what they say here with us
    Best wishes
    Ben
  • Hello Ben,
    nice to have coffee again.

    Incidentally, the instructions you mentioned are excellent, especially the instructions for the coffee spout, which are finally illustrated. You could have found the rest here in the download area.

    LG
    Helmut